How Much Does a Corrugated Metal Roof Cost?

corrugated metal roof

How Much Does a Corrugated Metal Roof Cost?

A corrugated metal roof can cost anywhere from between $10,500 to $19,500 to install. The final price will depend on the type of metal roof, the slope, the pitch, and the size of the roof. Homeowners can generally expect to pay anywhere between $3.50 to $6.50 per square foot. This translates to $350 to $650 per square installed on a standard-sized single-story home. 

How Do You Weather Corrugated Metal Roofing?

The vintage look of corrugated metal is attractive for many reasons, including for creating a rustic look. Would you like to age your corrugated metal roofing? If so, you can utilize toilet cleaner to age metal roofing. Clorox clinging bleach gel toilet bowl cleaner is apparently quite effective at aging corrugated metal. There are other ways to age metal roofing, however, they use very corrosive chemicals and can be very harmful if misused.

What is the Cheapest Metal Roofing?

According to a leading website, galvanized steel is the most affordable form of metal roofing. The cost range for galvanized steel is between $2.65 to $3.75 for each square foot. Conversely, stone coated steel tiles and shingles are on the more expensive side of the spectrum. Those go for anywhere between $3.50 to $4.25 for each square foot.

How Wide is Corrugated Tin?

Professional corrugated metal roofing is a great option for many reasons. And yet many questions remain, including how wide corrugated tin is. For this answer, let’s turn to the experts. According to a leading home guide website, corrugated tin measures between twenty-six and thirty-six inches. The width of this roofing material is measured straight across the top of the sheet from each edge to each edge. The two most common widths for corrugated tin are 26 and 36 inches. Another standard width to be aware of is 24 and 39 inches.

Does Corrugated Metal Rust?

Corrugated metal is very durable and corrosion-resistant. There are two ways to rust corrugated metal. The first way is with muriatic acid or bleach toilet bowl cleaner, as previously mentioned, or naturally, through weathering and water exposure. The zinc coating on hot-dipped galvanized steel will last for thirty-five to fifty years in corrosive soil, and longer in less corrosive soil. Essentially, with roofing maintenance and a good roof coating, corrugated metal will last a long time without rusting. 

Who Sells Corrugated Metal Roofing?

There are many roofing companies that provide corrugated metal roofing installations. It’s important to always consult the services of an insured roofing professional in order to understand the intricacies of the process and whether or not a corrugated metal roof is best for your roof installation. An insured roofer will also be able to discuss the cost of a corrugated roof versus a different style of roofing. 

Where to Screw Corrugated Metal Roofing

If you need to screw a corrugated metal roof for your roof installation, it will be important for you to utilize proper procedures. That’s because any breaks in the roof surface area will become leaks sooner rather than later. To begin with, the panels should be cut to the length. Some holes should be pre-drilled. If they are not already, they should be drilled prior to installation. Next, you can install the panels. You can screw the panels in the areas where the pre-drilled holes have been placed. Then, you will complete the other side. 

corrugated metal roof

Can You Bend Corrugated Metal Roofing

Using a rolling technique, you can bend the sheets of metal roofing. Rolling uses a die, which is sized according to the preferred radius of the metal panel. Rolling corrugated metal can produce a maximum bend of 360 degrees. It’s important to note that some metals, like steel, can be heated prior to rolling to promote an elastic effect.

What is Corrugated Metal Roofing Made Of

If you are wondering what corrugated metal roofing is made of, you’re not alone. Please refer to the following list to learn more about this extraordinary roofing material.

  • Corrugated metal roofing. This material has many different names. Universally, corrugated galvanized iron or steel is the name for this roofing material. Other names include wriggly tin (UK military slang), corrugated sheet metal (North America), and pailing (Caribbean English).
  • Screws. The size screws that are used for metal roofs are generally 1 ½ inch and end with a penetration of about 1 1/4th of an inch. This will help the metal roof panel remain firmly in place.
  • Underlayment. Traditionally built homes will need an underlayment with a metal roofing installation. Insulation will need to be installed between joists and sheathing.

Your corrugated metal roof must be handled with professionalism. Our staff at ProCraft Exteriors are ready to assist. Please call us at (314) 786-3732. Discover more about how a corrugated metal roof in Chesterfield and St. Louis, MO can solve your roofing problems!